Senseo HD7850 User Manual download pdf (Page 22)

8 Press the on/off button 3.

The machine is ready for use when the indicator light is on continuously.

9 Place the 1-cup pod holder q in the coffee machine. Close the lid

and make sure it is properly locked.

Note: Always put a used coffee pod in the pod holder when you descale the

machine. This pod serves as a ‘lter’ to prevent the sieve in the pod holder from

getting clogged with scale residue.

10 Put a bowl with a capacity of at least 1.5 litres under the spout to

collect the descaling mixture.

11 Press the Calc-Clean button to start the descaling program.

, During the descaling program, the machine pauses a few times to

remove scale deposits from the inside of the SENSEO

machine.

, During the descaling program, the indicators on the control panel on

the lid light up sequentially to indicate that the machine is descaling.

, The descaling program takes about 35 minutes. When the descaling

program is nished, the Calc-Clean indicator ashes rapidly.

Never interrupt the descaling process!

Never descale the SENSEO

coffee machine with the lid open. Make

sure the lid is properly locked.

12 Empty the water reservoir, rinse it and ll it with fresh water.

Caution: Do not rell the water reservoir with used hot water or the

used descaling mixture.

13 Press the Calc-Clean button to rinse the machine.

Note: The rinsing process takes a few minutes.

14 Remove the pod from the pod holder and clean the pod holder to

prevent the sieve in the centre from getting clogged.

15 Rinse the machine a second time by repeating steps 12 and 13.

16 Remove the Calc-Clean tool from the coffee spout. Reinsert the

Calc-Clean tool into the recess in the back of the machine.

The descaling procedure is now nished and the machine is ready to brew

coffee again.

ENGLISH22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

No comments

Senseo HD7850 User Manual Page 22